The Cleaning Tool Kit is used to remove excess plastic from transducer mounting holes prior to installation. Installation of transducers into plugged and/or dirty mounting holes is a major cause of installation-related damage.
The Cleaning Tool Kit allows the mounting hole to be properly cleaned and checked for integrity.
Cleaning tools are available for 1/2-20 mounting holes (CT12) and M18x1.5 mounting holes (CT18).
Note: The cleaning tool should be used when the polymer is molten. Care must be taken not to exceed the specified torque rating (125 inch-pounds) so as to not damage the tool.
3007751905 
1179322382 
+86 133 5788 9265 
info@wheat-auto.com 
